User manual

DPSI RV Family Operating Instructions Version 2.1
page 4 of 44
1. Preface
With the EMCOTEC DPSI RV (Dual Power Servo Interface –
Regulated Voltage) you purchased a high grade, modern and secure
product. We appreciate your trust and assure you that you made the
right choice!
Long lasting experience for years in development and manufacturing of
electronically systems as well as the knowledge of the world’s best
model airplane pilots has influenced the development of the DPSI
systems. All products are manufactured at EMCOTEC GmbH in
Germany on our own production line. Extensive optically and
electronically end tests for every system, which leaves our house,
assure that you, our customer acquire an absolute reliable product,
which considerably increases the reliability of your valuable RC-Model.
Of course, the products of the DPSI family not only have been tested
extensively in the laboratory, but also went through intensive flight-
testing. Extensive series of tests with especially in house developed
data loggers have been accomplished to measure the real current
consumption in model airplanes. Like done in the automotive industry
an FMEA (Failure Mode and Effective Analysis) reduce the possibility
of damage and malfunction on operating errors to a minimum.
We kindly ask you to read these operating instructions carefully and to
observe the installation hints. Thus, errors can be avoided in advance.
We are all ears for your wishes and questions. Challenge us!
Bobingen, March 2010
The Staff of EMCOTEC GmbH