User manual

DPSI RV Family Operating Instructions Version 2.1
page 19 of 44
6.3. Connecting the Switch Transmitter
With a mechanical switch, one risks a breakdown. There are intense
vibrations at the sidewall of the fuselage. Thus, malfunctions of
mechanical switches were observed many a time. In order to avoid
mechanical influences, electronically switches including self-holding
circuitries are used in DPSI systems.
The electronically switches are only controlled by a pulse from the
external switch actuator. Therefore the receiver set is turned on or off
by a pin or magnet and the corresponding switch actuator only delivers
the on / off signal.
Switch Dimensions:
Backside of the switch actuator including connected battery controllers