User manual

DPSI RV Family Operating Instructions Version 2.1
page 16 of 44
Generally, you must always ensure that the fastening is as vibration-
free as possible and has sufficient air circulation. Reduction of vibration
is particularly important for the receiver, since it reacts far more
sensitively to mechanical vibrations than the DPSI.
An approved method is to mount the DPSI to a mounting board
between 4 short gas hoses and M4 screws. These serve as
outstanding vibration dampers and allow for neat mounting (see
photo).
Of course, mounting with screws and short spacers is possible. This is
recommended for gliders or jets (models with little vibrations, see photo
on page 17).