User manual

DPSI RV Family Operating Instructions Version 2.1
page 14 of 44
The DPSI 2001 RV as well as the DPSI RV offers the option of
connecting a second receiver. Both receivers should be of identical
type (the type of modulation must always be the same). We
recommend the DPSI TWIN for complete redundancy of the receiver
set.
Due to the elaborated safety properties in connection with extensive
tests, operating errors and external influences usually do not lead to
damage of the DPSI RV.
5. Packing Contents
Shipment of DPSI 2001 RV:
 “DPSI 2001 RV“ base device with battery connector cables
 10 pieces receiver connection cable (including servo
connectors at both ends => patch cable)
 On/Off switch transmitter at one’s own option
 4 pieces of high current connectors for the batteries and the
DPSI 2001 RV (2 plugs and 2 sockets)
 8 pieces shrink hose for the high current sockets
 Operating instructions
 EMCOTEC sticker
Shipment of DPSI RV:
 “DPSI RV” base device
 12 pieces receiver connection cable (including servo
connectors at both ends => patch cable)
 On/Off switch transmitter at one’s own option
 2 pieces high current sockets for the batteries
 4 pieces shrink hose for the high current sockets
 Operating instructions
 EMCOTEC sticker
Each DPSI RV system carries its own serial number and for each
function, it is tested several times before delivery.