User manual

DPSI RV Family Operating Instructions Version 2.1
page 10 of 44
4. The DPSI RV-Family in Headwords
 Dual power supply with regulated supply voltage for receiver and
servos
 Output voltage adjustable in 4 steps from 5.4 volts to 7.4 volts
(5.9 volts for DPSI 2001 RV)
 Compliant to all manufacturers RC receiver sets
 Continuously constant servo power through constant supply
voltage
 LiIon / LeFePO4 / LiPo cells usable
 5-, 6- (and 7-cell) NiCad / NiMH batteries usable
 Electronically, failsafe on/off switch transmitter with additional
connectivity for external LED voltage displays
 Short-circuit-proof servo pulse amplification in current saving
APP-Technology (Advanced Push Pull)
 HFIB (High Frequency Interference Blocking) blocking of HF
interference caused by long servo cables (for each servo
individually)
 Loadable up to 60 amps peak
 Up to 12 receiver channels including current distribution of up to
32 servos (depending on used system)
 IVM (Intelligent Voltage Monitoring) – intelligent voltage
monitoring with acoustically and optically status indication for four
different battery types (programmable)
 Reduced counter electro automotive force effect from servos
through usage of plenty filter capacitors
 Cable free systems, i.e. all connections are pluggable and
therefore replaceable anytime
 Problem free operation of two receivers possible
 Special grounding concept for undisturbed operation and most
safety