Flanders Host Gateway User Guide
Introduction This installation guide provides basic instructions for Gateway Host. Product Description The Flanders Host includes Bluetooth 5.1 Mesh and 10/100 Ethernet (Cloud Interface) Features.The 5.1Mesh is used for communicating with the Node Product or BLE App.The Host supports standard IT network communications and is easily integrated onto wired Ethernet networks for relaying data to and from the host application.
Product Features 1. Local Report Storage 2. Cloud Interface for “Real-Time” report and database acquisition (AWS) 3. iOS & Android App for commissioning 4. Embedded Web UI for reporting and diagnostics 5. Mesh Self-Healing Network 6. 10/100 Ethernet (Cloud Interface) 7.Bluetooth 5.1 Mesh 8.Power Switch 9.Reset Switch 10.Restore Switch 11.
Hardware Features： BLE 5.1 Mesh (SiLabs BG21),Cortex ARM Processor (SAMD2),4GB Flash (NAND),Ethernet 10/100 µUSB 5V @ 1A,LCD Display,LED Status Indicator.... Circuit Board Terminal Blocks Ethernet Interface (IP): The Host has a female RJ-45(8P8C) connector for linking the device via Ethernet to the host application machine. Reset Switch : The Host contains a reset button that when press ,the BLE Mesh function will restart.And the BLE app will disconnected with the unit.
Restore Switch: The Host contains a restore button for reset the host system when press the button and hold for a while until see the LCD display indicated the “Reboot”,then the unit will auto-restart. LCD Display: The Host contains a LCD display to show the Ethernet IP address when the unit plug the CAT5 cable to con nect the Router and computer.We can easier to get the IP address of the unit. DC Power Input: The Host contains a DC terminal block for supporting 5VDC/500mA.
Circuit Board details
System Architecture
Specifications Maximum Tx Power RF 20dBm@2.402GHz-2.480GHz RFSupported Modulation Format GFSK Ethernet 10/100 Mbps Power Source 5V DC/500mA LED Status Indicator Alternate flashing RGB Product ID Unique factory-programmed ID Construction White ABS plastic Dimensions (H x W x D) 47x79.9x160.3mm Weight 205.
Compatible Accessories 1. ENTERNET SHILED CABLE L=1800mm OD:6.
2.SWITCHING ADP 100~240V 5VDC 0.5A XH-UL0505-A1+5V-0.
FCC Warnning: Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
