User manual

Master Components - Adaption Masters
Product Catalogue all information for reference only - technical changes reserved - rev. 9 Page 36 of 171
5.4.2 Z-BeagleboneBrick-## (for Beaglebone)
Bus Coupler, Local-Master
Remote Coupling Unit for
.. LAN (via Ethernet)
.. CAN
.. Serial (via RS485, RS232, TTL)
.. USB, SD Card
.. LCD-Display-Interf., Touch (res.)
.. RTC (Li-Bat/Hi-Cap), EEPROM
Modul ID
1-711, 1-712
Order No.
Z-BeagleboneBrick-0#
Terminals
Size, Speed
9 eU (99mm x 72mm)
BB
FCP
1-1-1
Variants:
0# =
01: full amount (1-711)
02: no: serial, RTC, EEPROM, LCD-Display Interf
(1-712)
5.4.2.1 Description
It is an adaptionboard for the Beaglebone Black from TI which becomes an important profes-
sional industrial platform for many measure and controll applications. By keeping the standard
brick sizes, it is possible to use this board in all given mounting types.
The adaption unit is driven by 24Vdc and serves also as power-supply unit that delivers 3.3V
and 24V for the slave modules. The LCSUL (together with the BBB) acts as an autark lo-
cal-master and supply the logical control of the connected slave modules.
All grey comments are BeagleBone Black standard interfaces / functions.
BeagleBone Black
CAN connector
ST4, Pin 1 .. 5
(from left to right)
RS232 connector
ST5, Pin 1 .. 3
(from left to right)
Power connector
K3, Pin 1 .. 4
(from left to right)
Ethernet RJ45
Connector with LAN
status LED
LEDs 1 … 5
(from top to bottom)
Reset button
ON / OFF button
RS485 connector
ST3, Pin 1 .. 3
(from left to right)
µSD Card
Micro USB connector
Micro HDMI
LCD connector
brickBUS®
connector
Jumper postion
LED 6