User manual

Slave Components - P-Modules (Process Control)
Product Catalogue all information for reference only - technical changes reserved - rev. 9 Page 109 of 171
6.5.3.6 Technical Data
Inputs:
Number of digital inputs ........... 4
Connection technology ............. 2-wire
Type ........................................... n-switching
Input current .............................. < 5mA
Number of analog inputs .......... 2
Connection technology ............. 2/3-wire (supports sensor power supply)
for 5-131:
Type ....................................... voltage
Input range ............................ nom. 0...10V (full approx. 11.4V , max. 20V permanent)
Input resistance .................... approx. 100kOhm
Filter....................................... hardware, 1
st
order, f
cut off
= approx. 50Hz
for 5-132:
Type ....................................... current
Input range ............................ nom. 0...20mA (full aprox. 22.7mA, max. 30mA permanent)
Input resistance .................... approx. 90Ohm
Filter....................................... hardware, 1
st
order, f
cut off
= approx. 100Hz
Resolution ................................. 10 Bit, 0.1% (related on measure range)
Linearity ..................................... 0.2%
Accuracy .................................... 0.5%
Outputs:
Number of relay outputs ........... 2
Type ........................................... CO (change over), isolated
Switching voltage ...................... max. 230Vac / 30Vdc
Switching current ...................... max. 5A ac/ 2.5A, for details refer to the LYCA024V datasheet
Others:
Bus power consumption ........... sensor supply@24V, 0..15mA@24V, <10mA@3.3V
Isolation buses to I/O ................ none (important details: consider to chapter 4)
Status indication ....................... LEDs for each digital input, output and for the module status
Mechanics:
Terminals (relays)...................... 6, cage clamp Wago250
Connection (relays) ............... usable with one litz wire from 0.2 – 1.5 mm²
Terminals (others) ..................... 14, cage clamp Wago250
Connection (others) .............. usable with one litz wire from 0.2 – 0.5 mm²
Dimensions .............................. 66 x 72 x 20 mm
Weight ...................................... approx. 50g
Options:
Plug-in terminals ....................... optional available