User manual

ManualsBrandsEMBRICK ManualsPLCVIM0-0150A00

Slave Components - P-Modules (Process Control)

Product Catalogue all information for reference only - technical changes reserved - rev. 9 Page 107 of 171

6.5.3 P-2Rel4Di2Ai-0#

2x Relay-Output, CO, potential free

4x Digital-Inputs, n-switch, 2-wire

2x Analog-Inputs, 10V/20mA, 2/3wire

Module ID

5-131, 5-132

Order No.

CAE_P-2Rel4Di2Ai-0#

Terminals

push-in (for ≤ 0.5mm²)

Core

M16E

Size

6 eU (66mm x 72mm)

FCP

1-1-1

Variants

0# =

01: 0..10V (5-131)

02: 0..20mA (5-132)

6.5.3.1 Brief Description

The Module includes two potential free relays, four digital

inputs and 2 analog inputs with power supply.

The digital inputs are designed for an external switch / open

collector to ground. The analog inputs are either voltage or

current inputs, depending on the variant.

6.5.3.2 Connectors and Indication-Operation-Elements

1………………6 7…………..…………….20

Status LED

Input LEDs

IN1…IN4 (from left to right)

Output LEDs

Out0…Out1 (from left to right)

Input Terminals

T7…20 (from left to right)

Output Terminals

Relays1

…

2 (switchover contact)

T1…6 (from left to right)

Summary of content (4 pages)

PAGE 1
Slave Components - P-Modules (Process Control) 6.5.3 P-2Rel4Di2Ai-0# 2x Relay-Output, CO, potential free Module ID 5-131, 5-132 4x Digital-Inputs, n-switch, 2-wire Order No. 2x Analog-Inputs, 10V/20mA, 2/3wire CAE_P-2Rel4Di2Ai-0# Terminals push-in (for ≤ 0.5mm²) Size 6 eU (66mm x 72mm) Core M16E BBFCP 1-1-1 Variants 01: 0..10V (5-131) 0# = 02: 0..20mA (5-132) 6.5.3.1 Brief Description The Module includes two potential free relays, four digital inputs and 2 analog inputs with power supply.
PAGE 2
Slave Components - P-Modules (Process Control) 6.5.3.3 Terminal Assignment Circuit Example 24V/L GND/N GND/N OUT GND PWR Ident. Ter.
PAGE 3
Slave Components - P-Modules (Process Control) 6.5.3.6 Technical Data Inputs: Number of digital inputs ........... 4 Connection technology ............. 2-wire Type ........................................... n-switching Input current .............................. < 5mA Number of analog inputs .......... 2 Connection technology ............. 2/3-wire (supports sensor power supply) for 5-131: Type ....................................... voltage Input range ............................ nom. 0...
PAGE 4
Slave Components - P-Modules (Process Control) 6.5.3.7 Process Data Image Organisation of the user data communicated via brickBUS: Out-Userdata from Master to Slave In-Userdata to Master from Slave total: 1 Bytes total: 5 Bytes Byt 0 Function Output setting rC Assign... ... + eB_B0, 0, ... ... ... + eB_B0, 1, ... Bit 0 = Relay 1 Bit 1 = Relay 2 Byte 0, 1 Function Analog-Input 1 2, 3 Analog- Input 2 4 Digital Input rC Assign... 0..979 = 0 .. 10V 0..899 = 0 .. 20mA ... + eB_W0, 0, ... 0..