User manual

Master Components - Adaption Masters
Product Catalogue all information for reference only - technical changes reserved - rev. 9 Page 34 of 171
5.4.1 Z-RasberryBrick-## (for Raspberry Pi)
Bus Coupler, Local-Master
Remote Coupling Unit for
.. LAN (via Ethernet)
.. Serial (via RS485 or RS232)
.. USB, SD Card
.. Display (via HDMI, USB-Touch)
.. RTC, EEPROM
Modul ID
1-701, 1-702
Order No.
Z-RasberryBrick-0#
Termianls
Size
9 eU (99mm x 72mm)
BB
FCP
1-1-1
Variants:
0# =
01: full amount (1-701)
02: no: serial, RTC, EEPROM (1-702)
5.4.1.1 Description
It is an adaptionboard for the Raspberry-Pi (Rev. B) which becomes an important education
tool and semi-professional industrial platform for many measure and control applications. By
keeping the standard brick sizes, it is possible to use this board in all given mounting types.
The unit is driven by 24Vdc and also serves as power-supply unit that delivers 3.3V and 24V for
the slave modules. The LSUH acts as an autark local-master and does the logical control of the
connected slave modules.
All grey comments are Raspberry Pi standard interfaces / functions.
Reset button
(resets the Raspberry PI)
Ethernet RJ45
Connector with
LAN-Status LED
DIP switch
DIP1 … DIP4
(from left to right)
RS485 connector
KL, Pin 1 .. 3
(from left to right)
power connector
GND | 24V | GND | 24V
(from left to right)
USB Type A
2 Connectors
RS232 / seriall Connector
brickBUS®
connector
LED 1
LED 2
LED 3
HDMI
Connector
Raspberry Pi