User manual

Passive Components - Adapters, Connectors
Product Catalogue all information for reference only - technical changes reserved - rev. 9 Page 151 of 172
7.4.1.2 CAE_X-ExpFlatM10_01 / CAE_X-ExpFlatF10_01
.. adapter to the next emBRICK Modul in
the next row
Modul ID
Order No.
CAE_X-ExpFlat#10_01
Variants
M: male conector to brickBUS
F: female conector to brickBUS
7.4.1.2.1 Brief Descriptor
With this adapter you can connect the bus to another row of emBRICK®-modules. This is nor-
maly used in enclosures where space is limited. The next row is placed with 1mm distance
between the PCBs. The male will be used on the right side of the modules and the female on
the left side. The modules can be initialized from left and right.
CAE_X-ExpFlatM10
first emBRICK row
second emBRICK row