User manual

Slave Components - P-Modules (Process Control)
Product Catalogue all information for reference only - technical changes reserved - rev. 11p Page 120 of 184
6.5.4.6 Technical Data
Note: For further global specifications refer to chapter 4
Input:
Number of digital inputs ........... 5
Connection technology ......... 2-wire, common ground
Type ....................................... n-switching
Threshold low/high ............... approx. 7,7/13,2V
Open input voltage ................ approx. 21V @ internal 24V supply from bus
Pull down current .................. approx. 5mA@24V internal supply
Number of current sensors ....... 1
current measurement range . 0
voltage ripple .................. 4% @ 50Hz
filter (falling slope) .......... Tau = 1s
Input range ...................... < 20 A
p
(full range = approx. 22 A
p
)
current measurement range . 1
voltage ripple .................. 8% @ 50Hz
filter (falling slope) .......... Tau = 0,5s
Input range ...................... < 2 A
p
(full range = approx. 2 A
p
)
Output:
Number of Relays NO ................ 2 (normal open)
Number of Relays CO ................ 4 (change over)
Switching voltage.................. 230Vac / 30Vdc
for Relay 1
Type ................................... 230V supply switching NO
Switching current .............. max. 5A ac/dc, for details refer to the RT33L024 datasheet
for Relay 2
Type ................................... 230V supply switching NO
Switching current .............. max. 5A ac/dc, for details refer to the JS24NK datasheet
for Relay 3 + 4
Type ................................... 230V supply switching CO
Switching current .............. max. 5A ac/dc, for details refer to the JS24NK datasheet
for Relay 5 + 6
Type ................................... isolated CO
Switching current .............. max. 4A ac/dc, for details refer to the LYCA024V datasheet
Others:
Bus power consumption ........... 0..75mA@24V, <10mA@3.3V
Isolation buses to I/O ................ none (important details: consider to chapter 4)
Status indication ....................... LEDs for each input, output and for the module status
Mechanics:
Terminals ................................... 1 x 30, cage clamp Wago250
Connection ................................ usable with one litz wire from 0.2 – 1.5 mm²
Dimensions .............................. 110 x 72 x 20 mm
Weight ...................................... approx. 130g