User manual

ManualsBrandsEMBRICK ManualsPLCVIM0-0109A00

Slave Components - B-Modules (Building)

Product Catalogue all information for reference only - technical changes reserved - rev. 9 Page 94 of 171

6.4.5 B-4DimLedI-0#

4x LED-Dimmer, const. current, 12-40V

Modul ID

4-565, 4-566

Order No.

CAE_B-4DimLedI-0# (see below)

Terminals

push-in (for ≤ 0.5mm²)

Core

M24B

Size

5 eU (55mm x 72mm)

FCP

1-1-1

Variants

(0# =)

01: 0..350mA (4-565)

02: 0..700mA (4-566)

6.4.5.1 Brief Description

This module contains four independent PWM-LED outputs with a

common supply of 12...40V and a PWM-frequency of appox. 670

Hz. The PWM resolution is 24.000 steps.

Each of these channels can control a permanent resistive load of

max. 1A and contains a quick acting 1A melting fuse for output

protection.

6.4.5.2 Connectors and Indication-/Operation-Elements

1……………………10

Supply Terminals

…10

(from left to right)

Status LED

Fuses

…4

(from left to right)

Summary of content (4 pages)

PAGE 1
Slave Components - B-Modules (Building) 6.4.5 B-4DimLedI-0# 4x LED-Dimmer, const. current, 12-40V Modul ID 4-565, 4-566 Order No. CAE_B-4DimLedI-0# (see below) Terminals push-in (for ≤ 0.5mm²) Size 5 eU (55mm x 72mm) Core M24B BBFCP 1-1-1 Variants 01: 0..350mA (4-565) (0# =) 02: 0..700mA (4-566) 6.4.5.1 Brief Description This module contains four independent PWM-LED outputs with a common supply of 12...40V and a PWM-frequency of appox. 670 Hz. The PWM resolution is 24.000 steps.
PAGE 2
Slave Components - B-Modules (Building) 6.4.5.3 Terminal Assignment Circuit Example mA Ident. Ter. Function Usage 24 0 + + + + - 1 2 3 4 5 6 7 8 9 10 Supply Input +24V GND +24V Output +24V Output +24V Output +24V Output Dimmer 1 Dimmer 2 Dimmer 3 Dimmer 4 internal simplified diagram 1A 6.4.5.4 LED Indications Status-LED .................................. module status (see 6.1.1) 6.4.5.
PAGE 3
Slave Components - B-Modules (Building) 6.4.5.6 Technical Data Note: For further global specification aditionally refer to chapter 4 Output: Number of dimmer outputs....... 4 Connection technology ......... 2-wire Type ....................................... p-switching Output voltage....................... = level of separate supply power Output current ....................... max. 1A each Output range ......................... 0..100% Others: Separate supply voltage ...........
PAGE 4
Slave Components - B-Modules (Building) 6.4.5.7 Process Datae Image Organisation of the user data communicated via brickBUS: Out-Userdata from Master to Slave In-Userdata to Master from Slave total: 8 Bytes total: 8 Bytes Byte 0, 1 Function Dimmer 1 2, 3 Dimmer 2 4, 5 Dimmer 3 6, 7 Dimmer 4 0...24000 Dig. ≡ 0..100% 0...24000 Dig. ≡ 0..100% 0...24000 Dig. ≡ 0..100% 0...24000 Dig. ≡ 0..100% rC Assign... ... + eB_W0, 0, ... ... + eB_W1, 0, ... ... + eB_W2, 0, ... ... + eB_W3, 0, ...