User manual

Slave Components - B-Modules (Building)
Product Catalogue all information for reference only - technical changes reserved - rev. 9 Page 80 of 171
6.4.1.6 Technical Data
Number of temperature sensor inputs: 8
Connection technology ......... 2-wire
for 4-401:
Type ................................... KTY81-2k
Input range ........................ nom. -30...80°C (full ADC approx. - 40...105°C)
Measure current ................ approx. 0.6mA
for 4-402:
Type ................................... KTY81-2k
Input range ........................ nom. -5...45°C (full ADC approx. - 15...55°C)
Measure current ................ approx. 0.6mA
Resolution .............................. 10 Bit, 0.1% (related on measure range)
Linearity ................................. 0.2% (related on measure range)
Accuracy ................................ 0.5% (related on measure range)
Filter....................................... hardware, 1
st
order, f
cut off
= approx. 100Hz
Others:
Bus power consumption ........... sensor supply@24V, <10mA@3.3V
Isolation buses to I/O ................ none (important details: consider to chapter 4)
Status indication ....................... LEDs for each digital input, output and for the module status
Mechanics:
Terminals (shield bridge) .......... 2, cage clamp Wago250
Connection (shield bridge) ........ usable with one litz wire from 0.2 – 1.5 mm²
Terminals (others) ..................... 2x12, cage clamp Wago250
Connection (others) .................. usable with one litz wire from 0.2 – 0.5 mm²
Dimensions .............................. 44 x 72 x 20 mm
Weight ...................................... approx. 30g
Options:
Plug-in terminals ....................... optional available