User manual

ManualsBrandsEMBRICK ManualsPLCVIM0-0105-01

Slave Components - G-Modules (General Purpose)

Product Catalogue all information for reference only - technical changes reserved - rev. 9 Page 47 of 171

6.2.3 G-2RelNo4RelCo-01

6.2.3.1 Brief Description

This Relay module includes six isolated Relays. Each can switch a

current of max. 4A. The first two are closing contacts. The other

four are changeover contacts. The state of each relay is visualized

by an LED.

6.2.3.2 Connectors and Indication-/Operation-Elements

2x Relay-Output, NO, potential free

4x Relay-Output, CO, potential free

Module ID

2-301

Order No.

CAE_G-2RelNo4RelCo-01

Terminals

push-in (for ≤ 1.5mm²)

Core

M16A

Size

6 eU (66mm x 72mm)

FCP

1-1-1

Variants

1……4

5………………………..16

Status LED

Output LEDs

O1…O6 (from left to right)

Output Terminals

Relay3

…6 (changeover)

…16 (from left to right)

Output Terminals

Relay1

…

2 (closing contact)

…4 (from left to right)

Summary of content (4 pages)

PAGE 1
Slave Components - G-Modules (General Purpose) 6.2.3 G-2RelNo4RelCo-01 2x Relay-Output, NO, potential free 4x Relay-Output, CO, potential free Module ID 2-301 Order No. CAE_G-2RelNo4RelCo-01 Terminals push-in (for ≤ 1.5mm²) Size Variants 6 eU (66mm x 72mm) Core M16A BBFCP 1-1-1 - 6.2.3.1 Brief Description This Relay module includes six isolated Relays. Each can switch a current of max. 4A. The first two are closing contacts. The other four are changeover contacts.
PAGE 2
Slave Components - G-Modules (General Purpose) 6.2.3.3 Terminal Assignment Circuit Example L1 N M N L1 N L1 N Ident. Ter.
PAGE 3
Slave Components - G-Modules (General Purpose) 6.2.3.6 Technical Data Note: For further global specifications refer to chapter 4 Outputs: Number of Relays NO ................ 2 (normal open, each with 2 terminals) Number of Relays CO ................ 4 (change over, each with 3 terminal) Type ....................................... isolated Switching voltage.................. max. 230Vac / 24Vdc Switching current .................. max. 6A ac/dc, for details refer to the LYCA024V datasheet.
PAGE 4
Slave Components - G-Modules (General Purpose) 6.2.3.7 Process Data Image Out-Userdata from Master to Slave In-Userdata to Master from Slave total: 1 Bytes total: 0 Bytes Byte 0 Function Relay Control rC Assign... Bit 0 = Relay 1 ... Bit 5 = Relay 6 ... + eB_B0, 0, ... ... ... + eB_B0, 5, ... Byte none Function rC Assign... Relay Control - - REL6 REL5 REL4 REL3 Bit 7 REL2 REL1 Bit 0 Bit 5-0.........................................