User manual

Slave Components - G-Modules (General Purpose)
Product Catalogue all information for reference only - technical changes reserved - rev. 9 Page 45 of 171
6.2.1.6 Technical Data
Note: For further global specification refer to chapter 4
Input:
Number of digital inputs ........... 8
Connection technology ......... 1-wire, common ground
Type ....................................... p-switching
"0" signal voltage ................... -3 ... 5V
"1" signal voltage ................... 15 ... 30V
Input current .......................... typ. 3mA to 8mA at “1” Signal
Output:
Number of digital outputs ......... 8
Connection technology ......... 1-wire, common ground
Type ....................................... p-switching
Output voltage ....................... = level of separate supply power
Output current ....................... max. 250mA each, sum over all outputs 500mA, for details re-
fer to the UDN2987 datasheet
Others:
Separate supply voltage ........... 24V DC ±10 % (used for output supply only)
Bus power consumption ........... 0mA@24V, <10mA@3.3V
Isolation Bus to I/O ................... none (important details: consider to chapter 4)
Status indication ....................... LEDs for each input, output and for the module status
Mechanics:
Terminals ................................... 2 x 12, cage clamp Wago250
Connection ................................ usable with one litz wire from 0.2 – 0.5 mm²
Dimensions .............................. 44 x 72 x 20 mm
Weight ...................................... approx. 30g
Options:
Plug-in terminals ....................... optional available