User manual

ManualsBrandsEMBRICK ManualsPLCVIM0-0104-01

Slave Components

- G-Modules (General Purpose)

Product Catalogue

all information for reference only - technical changes reserved - rev. 9

Page 43 of 171

6.2.1 G-8Di8Do-01

6.2.1.1 Brief Description

This module contains eight 24V digital inputs and eight 24V digital

outputs. Each output supports a current of 0.25A but not more

than 0.5A over all outputs in sum. All outputs have an over current

protection and a over temperature protection.

The logical state of each in-/output is visualised by an LED.

Common ground for in- and outputs are the 0V terminals. The

outputs are supplied via the 24V terminals over a 0.5A polyfuse.

All terminals use push-in connection technology for solid and

fine-stranded conductors with up to 0.5mm².

6.2.1.2 Connectors and Indication-/ Operation-Elements

ital

Input

24V,

switch,

wire

8x Digital-Output, 24V, p-switch, 1-wire

Module ID

181

Order No.

CAE_G

(

Terminals

push

(≤ 0.5mm²)

Core

M16A

Size

4 eU

(44mm x 72mm)

FCP

Variants

13…………………24

1...……………….12

Status LED

Output Terminals

T13...24 (from left to right)

Input Terminals

T1...12 (from left to right)

Output LEDs

LED11...LED18

(from up to down

Input LEDs

LED1...LED8

(from up to down)

Summary of content (4 pages)

PAGE 1
Slave Components - G-Modules (General Purpose) 6.2.1 G-8Di8Do-01 8x Digital-Input, 24V, p-switch, 1-wire Module ID 8x Digital-Output, 24V, p-switch, 1-wire 2-181 Order No. CAE_G-8Di8Do-01 (-p) Terminals push-in (≤ 0.5mm²) Size Variants 4 eU (44mm x 72mm) Core M16A BBFCP 1-1-1 - 6.2.1.1 Brief Description This module contains eight 24V digital inputs and eight 24V digital outputs. Each output supports a current of 0.25A but not more than 0.5A over all outputs in sum.
PAGE 2
Slave Components - G-Modules (General Purpose) 6.2.1.3 Terminal Assignment Circuit Example Ident. Ter. Function Usage (lower terminal row) 0V 1 sep. supply power 24 2 I1 3 Input 1 I2 4 Input 2 I3 5 Input 3 I4 6 Input 4 I5 7 Input 5 I6 8 Input 6 I7 9 Input 7 I8 10 Input 8 0V 11 sep.
PAGE 3
Slave Components - G-Modules (General Purpose) 6.2.1.6 Technical Data Note: For further global specification refer to chapter 4 Input: Number of digital inputs ........... 8 Connection technology ......... 1-wire, common ground Type ....................................... p-switching "0" signal voltage................... -3 ... 5V "1" signal voltage................... 15 ... 30V Input current .......................... typ. 3mA to 8mA at “1” Signal Output: Number of digital outputs .........
PAGE 4
Slave Components - G-Modules (General Purpose) 6.2.1.7 Process Data Image Out-Userdata from Master to Slave total: 1 Bytes Byte Function rC Assign... ... + eB_B0, 0, ... 0 Digital Output 1…8 ... (DO1..8) ... + eB_B0, 7, ... In-Userdata to Master from Slave total: 1 Bytes Byte Function 0 Digital Input 1…8 (DI1..8) rC Assign... ... + eB_B0, 0, ... ... ... + eB_B0, 7, ... Digital Output DO8 Bit 7 DO7 DO6 DO5 DO4 DO3 DO2 DO1 Bit 0 DI2 DI1 Bit 0 Bit 7-0.........................................