User`s guide

10 SSH Commands
Emblaze-VCON VCB5 User’s Guide 51
Command
services
Syntax services <service substring>
Description Lists the services that start with the substring and displays
their status.
services VCON will list only VCON services. For example,
• VCON VCB AGENT_1
Command setgkaddress
Syntax setgkaddress <IP address>
Description Define an IP address to the associated MXM.
Command setmcuaddress
Syntax setmcuaddress <IP address>
Description Define an IP address to this VCB.
Command setparam
Syntax setparam < param >
Description Define the specified parameter.
Parameters
T dhcp <0-3> - Enable DHCP to define the IP configuration
of the specified NIC.
T ipstatic < 0-3 >< IP address >< Subnet >< Gateway > - Define a
static IP configuration of the specified NIC.
T machinename - Define the name of the node.
T time - Set the current system date and time.
Command
setpassword
Syntax setpassword <user name>
Description Defines the user password. If a user name is specified, the
password change applies to that user name only.