User manual

Page | 87
Load Address: 80008000
Entry Point: 80008000
Verifying Checksum ... OK
Loading Kernel Image ... OK
OK
Starting kernel ...
…… //Middle section is omitted 中间部分省略
Arago Project http://arago-project.org dm37x-evm ttyS2
Arago 2010.07 dm37x-evm ttyS2
dm37x-evm login:root (enter root here to log in)
Enter the user name root to log in the system when you see prompt
information dm37x-evm login in the HyperTerminal window;
3. The filesystem of the DVSDK has been pre-installed some
applications; the following contents will take GStreamer
pipelines as the example to demonstrate H.264 decoding;
please execute the following instructions;
 root@dm37x-evm:cd /usr/share/ti/gst/omap3530
 root@dm37x-evm:/usr/share/ti/gst/omap3530# ./loadmodules.sh
 root@dm37x-evm:/usr/share/ti/gst/omap3530# gst-launch filesrc
location=/usr/share/ti/data/videos/davincieffect_480p30.264 \!
typefind ! TIViddec2 ! TIDmaiVideoSink -v
The information in the HyperTerminal window is shown below;
Setting pipeline to PAUSED ...
/GstPipeline:pipeline0/GstTypeFindElement:typefindelement0.
GstPad:src: caps = video/x-h264
Pipeline is PREROLLING ...
/GstPipeline:pipeline0/GstTIViddec2:tividdec20.GstPad:sink:
caps = video/x-h264
/GstPipeline:pipeline0/GstTIViddec2:tividdec20.GstPad:src:
caps = video/x-raw-yuv, format=(fourcc)UYVY,
framerate=(fraction)30000/1001, width=(int)720,
height=(int)576
/GstPipeline:pipeline0/GstTIViddec2:tividdec20.GstPad:src:
caps = video/x-raw-yuv, format=(fourcc)UYVY,
framerate=(fraction)30000/1001, width=(int)720,
Formatted: Font: (Default) Courier
New, Bold