User manual

Page | 85
mmc1 is available
reading x-load.bin.ift_for_NAND
11668 bytes read
HW ECC selected
NAND write: device 0 offset 0x0, size 0x2d94
12288 bytes written: OK
reading flash-uboot.bin
1152640 bytes read
SW ECC selected
NAND write: device 0 offset 0x80000, size 0x119680
1153024 bytes written: OK
reading uImage
2573772 bytes read
SW ECC selected
NAND write: device 0 offset 0x280000, size 0x2745cc
2574336 bytes written: OK
reading ubi.img
79036416 bytes read
SW ECC selected
NAND write: device 0 offset 0x680000, size 0x4b60000
79036416 bytes written: OK
When the LEDs on the kit start to blink, the programming process is
completed; please remove the SD card and reboot the kit to enter the
Android operating system.
Note:
 By default, the system supports a 4.3” screen. If you require another display
size, please refer to 3.7 Display Mode Configuration.