User manual

Page | 106
2. Check the options under the DirectShow branch in the
Catalogue Items View tree view on the left side of the Visual
Studio 2005 window as shown below;
Figure 25: DirectShow Branch
3. UNSELECT Third Party > BSP > mini8510:ARMV4I >
drivers > camera in the Catalogue Items View tree view on
the left side of the Visual Studio 2005 window, and then select
Build > Rebuild Solution on the menu bar to start compiling;
4. Copy the generated file CameraDshowApp_digital.exe from
C:\WINCE600\platform\mini8510\files\ to an SD card,
and then insert it into the SBC8140;
5. Connect the camera module (needs to be purchased
separately) to the SBC8140 and power it on, and then execute
the CameraDshowApp_digital.exe (saved on the SD card)
under a WinCE system to test the CAM8000-D module;