User manual

Page | 101

4. When you see the HyperTerminal information counting down in

seconds, please press the Space key on your PC’s keyboard to

enter the eboot menu.

5. Type a in the following eboot menu;

-----------------------------------------------------------

---------------------

Main Menu

-----------------------------------------------------------

---------------------

[1] Show Current Settings

[2] Select Boot Device

[3] Select KITL (Debug) Device

[4] Network Settings

[5] SDCard Settings

[6] Set Device ID

[7] Save Settings

[8] Flash Management

[9] Enable/Disable OAL Retail Messages

[a] Select Display Resolution

[0] Exit and Continue

Selection:a

6. Select a proper display mode in the following menu according to

your display device;

-----------------------------------------------------------

---------------------

Select Display Resolution

-----------------------------------------------------------

---------------------

[1] LCD 480x272 60Hz //4.3-inch LCD display, default device

[2] DVI 640x480 60Hz

[3] DVI 640x480 72Hz

[4] LCD 800x480 60Hz //7-inch LCD display

[5] DVI 800x600 60Hz // LVDS display

[6] DVI 800x600 56Hz

[7] VGA 1024x768 60Hz //VGA display