User manual

Page | 100
3. Insert the SD card into the SBC8140 and power it on while
pressing and holding the BOOT button (Button CN121); the
information in the HyperTerminal window is shown below;
60
Texas Instruments Windows CE SD X-Loader for EVM 3730
Built May 29 2012 at 14:43:06
Version BSP_WINCE_ARM_A8 1.01.00.03
open ebootsd.nb0 file
Init HW: controller RST
SDCARD: requested speed 1000000, actual speed 1000000
SDCARD: requested speed 25000000, actual speed 19200000
jumping to ebootsd image
Microsoft Windows CE Bootloader Common Library Version 1.4 Built
May 29 2012 14:39:28
Texas Instruments Windows CE EBOOT for OMAP35xx/37xx, Built May
29 2012 at 15:19:04
EBOOT Version 0.0, BSP BSP_WINCE_ARM_A8 1.01.00.03
TI OMAP3730 Version 0x00000012 (ES1.2)
TPS659XX Version 0x30 (ES1.3)
System ready!
Preparing for download...
INFO: Predownload....
Checking bootloader blocks are marked as reserved (Num = 14)
Skip bad block 4
Skip bad block 5
Skip bad block 6
Skip bad block 8
Skip bad block 11
WARN: Boot config wasn't found, using defaults
INFO: SW4 boot setting: 0x2f
>>> Forcing cold boot (non-persistent registry and other data
will be wiped) <<<
Hit space to enter configuration menu 5... (press Space key to
enter eboot menu)