Manualshelf

User manual

ManualsBrandsEmbest ManualsComputer equipmentSBC6300x
31323334353637383940
Page | 32
4 Booting the WinCE 6.0 system
1. Refer to section 3; select the option to boot from DataFlash or
NAND flash then burn the WinCE 6.0 system image files.
2. Set the power SWITCH to the ON state, the WinCE system will
be booted. Enter the WinCE 6.0 system, the TFTLCD will first
display the calibration touch screen as shown below.