User manual

All of these software or component system since there are dependent relationship
with Suggestions listed in strict accordance with the installation, and installed in
order default path.
4.3.2 system complie
If the sample Windows Embedded CE 6.0 OS image in the CD of SOC8200 satisfies your
applications, you just need to add it into your application and get the authorization of Microsoft
Corporation. Otherwise, you will need to re-customize the system and rebuild the image. This
section describes how to use SOC8200 Board Support Package (BSP) to create the Windows
Embedded CE 6.0 system image run on SOC8200 hardware platform.
4.3.2.1 Preparation
Embest Info&Tech Co.,LTD., has completed in SOC8200 hardware platform driver and the related
resources integration, so the user is in use in SOC8200 customize Windows CE 6.0 system,
Embedded security before has need of the following preparation:
Decompress [SOC8200\WinCE\BSP\AM35x_BSP.rar] to obtain AM35x_BSP directory.
Decompress [SOC8200\WinCE\BSP\COMMON_TI_V1.rar] to obtain COMMON_TI_V1
directory.
Decompress [SOC8200\WinCE\BSP\AM35x_OSDesign.rar] to obtain AM35x_OSDesign
directory.
 Copy Decompress directory [SOC8200\WinCE\BSP\AM35x_BSP ] to
[C:\WINCE600\PLATFORM] directory。
 Copy Decompress directory [SOC8200\WinCE\BSP\AM35x_OSDesign ] to
[C:\WINCE600\OSDesigns] directory。
 Copy Decompress directory [SOC8200\WinCE\BSP\COMMON_TI_V1 ] to
[C:\WINCE600\PLATFORM\COMMON\SRC\SOC\] directory。
C:\WINCE600\OSDesigns OSDesigns need to establish the folder.
For the 4.3” LCD
Modify C:\wince600\platform\am35x_bsp\src\bsp_common\display\Lcd_cfg.h
//-------------------------------------------
//#define lcd_7inch 1
#define lcd_43inch 1
//#define lcd_vga_1024x768 1
//--------------------------------------------
For the 7” LCD