User manual

4.2.1.2 Boot from SD card
Copy image files MLO、EBOOTSD.nb0、NK.bin From CD:\WinCE\image\
VGA_1024x768(lcd_800x480 or lcd_480x272)\SD directory to SD card.
If users need to switch to SD card, need to start in SOC8200 J24 connected to the motherboard
jump line on cap, electric start, the system immediately instead from MMC/SD start.
the method to update the image from the SD card will be show in 【4.4.1 Update
the image for SD card】
4.3 WINCE System Development
4.3.1 Development environment building
4.3.1.1 Install the cross compilation environment
Based on the development of the SOC8200 involves two aspects: the bottom SOC8200 is based
on the hardware configuration and the development of Windows CE 6.0 operating system;
Embedded security The upper is developed on the basis of the operating system application. Two
levels of Windows CE 6.0 development are Embedded security must be based on Visual Studio
2005 (VS2005) integrated development environment.
Developing applications need installing software and updating:
 Visual Studio 2005
 Visual Studio 2005 SP1
 Visual Studio 2005 SP1 Update for Vista (if applicable)
 ActiveSync 4.5
The development of Windows Embedded CE 6.0 requires sequential installation of software and
updating:
 Visual Studio 2005
 Visual Studio 2005 SP1
 Visual Studio 2005 SP1 Update for Vista (if applicable)
 Windows Embedded CE 6.0 Platform Builder
 Windows Embedded CE 6.0 SP1
 Windows Embedded CE 6.0 R2
 Windows Embedded CE 6.0 Product Update Rollup 12/31/2008
If there is an old CE development environment in the system, the use of Windows
Embedded CE 6.0 development platform may be influenced. Uninstalling the old
one and then installing the new one is recommended.
Please refer to appendix part, determine the of all kinds of resources get streams of
information;