User manual

2.After successful connection, PC will show a virtual network card as displayed in Fig 5.1：
Fig 5.1 virtual network card
3. Set the IP address of the virtual network card, for example:
Fig 5.2 IP Configuration
4. Set the IP network segment of SOC8200 board as the same as virtual network card:
[root@OMAP3EVM /]# ifconfig usb0 192.168.1.105
[root@OMAP3EVM /]# ifconfig
usb0 Link encap:Ethernet HWaddr CA:A3:26:97:50:A8
inet addr:192.168.1.105 Bcast:192.168.1.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:145 errors:0 dropped:0 overruns:0 frame:0
TX packets:6 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:14777 (14.4 KiB) TX bytes:796 (796.0 B)