Specifications

Page | 78
Command (m for help): [ x ] (type x to enter expert mode)
Expert Command (m for help): [ h ] (type h to set heads)
Number of heads (1-256, default xxx): [ 255 ] (set heads to 255)
Expert Command (m for help): [ s ] (type s to set sectors)
Number of sectors (1-63, default xxx): [ 63 ] (set sector to
63)
8. Use the following equation to calculate the number of Cylinders;
Cylinders = the total bytes written down previously÷255÷63÷512
Type the letters as shown in the following table to set Cylinders;
Expert Command (m for help): [ c ] (type c to set cylinders)
Number of cylinders (1-256, default xxx): (enter the number of
cylinders calculated above)...
Expert Command (m for help): [ r ] (type r to go back to normal
mode)
9. Type p to check the parameters set just now as shown below;
Command (m for help): [ p ]
63 sectors/track, 245 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
10. Create a FAT32 partition and transfer files from Windows
according to the operations in the follow table;
Command (m for help): [ n ] (type n to start creating partition)
Command action
e extended
p primary partition (1-4)
[ p ] (type p to create primary partition)
Partition number (1-4): [ 1 ] (set the partition number to 1)
First cylinder (1-245, default 1): [ ] (press Enter key on your
keyboard)
Using default value 1
Last cylinder or +size or +sizeM or +sizeK (1-61, default 61):
[ +5 ] （enter +5）
Command (m for help): [ t ] （type t）