Specifications

Page | 68
2. Copy the image files:
 MLO
 XLDRNAND.nb0
 EBOOTSD.nb0
 NK.bin
from the CD :\winCE\image\ VGA_1024x768 (lcd_800x480 or
lcd_480x272) \NAND directory to the SD card.
Image update
1. Set J24 to boot from SD card and insert the SD card then restart
your system. HyperTerminal will start printing the output
information, at the same time press [SPACE] to enter the EBOOT
menu.
2. Press [5] to enter the Flash manage menu.
3. Press [a], [b], [c] separately to write the image (XLDR, EBOOT,
NK) to flash.
4. Press [0] to return to the main menu, and press [2], [4], [7], [y]
to change the boot device.
5. Remove the SD card. Reboot the system, now the board will boot
from the NAND flash.
5.6 Application development
This section introduces how to develop an application running on the
SOC8200 hardware platform based on the Windows Embedded CE 6.0
operating system. The following preparations should be made:
Note:
 If user needs to use the SOC8200 BSP to develop a Windows Embedded CE 6.0
operating system, the construction of a Windows Embedded CE 6.0
development platform is required.