Quick Start Guide

START UP YOUR MAAXBOARD (ANDROID)
Your MaaXBoard doesn’t have a power switch: as soon as you connect
it to a power outlet, it will turn on.
1. Plug the USB Type-C power supply into a socket and connect it to the power port
2. You should see a green LED(LED0) light on the MaaXBoard, which indicates that
it is connected to power and bootloader(U- Boot) is loaded. As it starts up(this is
also called booting), you will see the other green LED(LED1) blink and many
character lines are printed on your screen.
3. After a few seconds the Android lock screen will appear, then you can slide to
unlock without password.
6