Installation guide

16
Problem To Check
The Embertec SmartSwitch™
PC is not receiving power.
The Embertec SmartSwitch™
PC is not powering down
my peripheral appliances.
This may be caused by
older laptops where the
batteries are continuously
recharging.
• Ensure the mains power supply
switch is turned on at the wall or
power board.
• Ensure the equipment is plugged
into the ‘Power Saver’ socket, not to
the ‘Computer Only’ socket.
• To maximise your energy saving,
please ensure your computer’s
power management settings are
active so the computer enters
sleep, standby or hibernate modes.
Normally this function is found in a
menu item called ‘Power Options’.
The Embertec SmartSwitch™
PC has stopped working.
• Unplug all the appliances connected
into the Embertec SmartSwitch™
PC adaptor and then unplug the
adaptor from the wall socket. Then
reconnect everything again.
Troubleshooting Guide