Installation guide

15
NOTE: The Embertec
SmartSwitch™ PC will switch
o all peripherals when the
computer enters sleep, standby,
hibernate or o modes. If any
program is working or activity
is detected, all peripherals will
remain on (even when the
screen saver is already on).
Overload Protection
The Embertec SmartSwitch™
PC is tted with a safety
device that switches o
the adaptor in the event
of overloading. Should the
adaptor stop working, turn
o and unplug all units, and
reset the safety protection
button on the adaptor before
attempting to restart the
adaptor. If the adaptor fails to
operate or the safety device
switches o again, contact
Embertec on 1300 0 EFFORT
1300 0 333 678.
To clean the outside of the
Embertec SmartSwitch™ PC
adaptor, rst switch o and
remove the adaptor from the
power point. Then wipe the
exterior with a soft, damp cloth.
Never use an abrasive cleaner.
When not in use, store the
Embertec SmartSwitch™
PC (preferably in its original
box) in a cool, clean and dry
location.
Disposal/Recycling
To protect the environment,
the Embertec SmartSwitch™
PC should be recycled, or
disposed of safely at the end
of its life. Please return the
Embertec SmartSwitch™ PC
to a recycling centre for safe
recycling or disposal.
www.recyclingnearyou.com.au
Care and Maintenance