Installation guide

17
Problem
To Check
The LED on the main body of
the Embertec SmartSwitch™
AV
(M)
is ashing, but my
SmartSensor LED does not
work (when plugged in and
powered on).
• Please check your SmartSensor
connection to the Embertec
SmartSwitch™ AV
(M)
by:
- Ensuring the SmartSensor cable
is safely and securely connected
to the underside of the Embertec
SmartSwitch™ AV
(M)
, and;
- Press the button on the top of the
SmartSensor when plugged into
the Embertec SmartSwitch™ AV
(M)
with the Embertec SmartSwitch™
AV
(M)
switched on. If the LED does
not ash whenever you press the
button, it may be evidence of a
faulty SmartSensor or connection.
Problem
The Embertec SmartSwitch™
AV has stopped working.
• Unplug all the appliances connected
into the Embertec SmartSwitch™
AV
(M)
adaptor and then unplug the
adaptor from the wall socket. Then
reconnect everything again.
The TV keeps turning o
after 1 hour.
• The SmartSensor default setting
for Active Powerdown is 60 minutes.
• Please see “Changing SmartSensor
setting for Active Powerdown” to
change Active Powerdown to 1, 2
or 3 hours.