Installation guide

14
Specications
• Surge protection is provided to all outlets.
• Australian designed and engineered.
• Conforms with Australian Electrical Safety Standards: AS/NZS
3197:2005 and AS/NZS 3100:2009
What Power is Wasted?
Many of today’s appliances for the home and oce continue to
use power, even when the appliance is turned o. Appliances
that are left on unintentionally waste even more power.
Overload Protection
The Embertec SmartSwitch™ AV
(M)
is tted with a safety device
that removes power in the event of overloading. Should this
occur, turn o and unplug all units, and press the reset button.
Then plug into the wall socket again. Once reset, use any
remote control to activate power to the Power Saver socket.
Connect one device at a time. If any of the devices cause
the safety device to trip again then get the oending device
serviced. If the Embertec SmartSwitch™ AV
(M)
fails to operate,
please contact Embertec on 1300 033 367.
Care and Maintenance
To clean the outside of the Embertec SmartSwitch™ AV
(M)
adaptor, rst
switch o and remove the adaptor from the power point. Then wipe
the exterior with a soft cloth. Never use an abrasive cleaner, or water.
Disposal/Recycling
To protect the environment, the Embertec SmartSwitch AV
(M)
should be recycled, or disposed of safely at the end of its life.
Please return to a recycling centre for safe recycling or disposal.
www.recyclingnearyou.com.au
Fast Facts