User manual

15
To Check
The EmberCeptor PC™ is not
receiving power.
The EmberCeptor PC™ is not
powering down my peripheral
appliances.
This may be caused by older
laptops where the batteries are
continuously recharging.
The EmberCeptor PC™ has
stopped working.
If the power board has a power switch, •
ensure it is turned on.
Ensure the equipment is plugged into the •
‘Power Saver’ socket, not to the ‘Computer
Only’ socket.
To maximise your energy saving, please •
ensure your computer’s power management
settings are active so the computer enters
sleep, standby or hibernate modes. Normally
this function is found in a menu item called
‘Power Options’.
Unplug all the appliances connected into •
the EmberCeptor PC™ device and then
unplug the device from the wall socket.
Then reconnect everything again.
Problem
Troubleshooting Guide