Full Product Manual

LOG PLACEMENT

MODEL: SH24NG Continued

Place cross-log (7) atop cross-log (6) and

to front center a s shown

MAINTENANCE

Very little maintenance is required. The carbon deposit resulting from combustion is natural and adds to the

realistic appearance of the set. If carbon becomes excessive it can be lightly brushed or vacuumed away.

TROUBLE SHOOTING

Problem Cause Corrective Action

1. No Ignition -Valve not fully in “on” position -turn valve to “on” position

-gas line obstruction -inspect supply lines/ tube for

kinks or obstructions

2. Inadequate ﬂame -Valve partially closed -open valve fully

-gas line partial obstruction -inspect burner tube for kinks

or obstructions

-log arrangement incorrect -rearrange logs to specified pattern

We recommend for the appliance and the fireplace flue to be professionally inspected and cleaned each year,

prior to operation.

Figure 11 - Incorrect Burner Flame Pattern

Figure 10 - Correct Burner Flame Pattern

Each time you operate the gas log set, pay attention to the flame pattern, and the amount of carbon (soot)

being produced. If the gas log set continuously produces excessive carbon, you may wish to rearrange the

stack of the logs to allow more free space for the flames.

VISUAL INSPECTION AND MONITORING OPERATION

(Excessive flame height, combined

with extremely yellow flames prod-

ucing carbon (soot)).