User's Manual

Page | 60 of 64 User Manual – PariRange – Revision 21019
© 2021 EmbedTek, LLC. All Rights Reserved.
15) The Advanced window displays the selected Tag ID. Confirm that the correct Access
Point is selected.
16) Click on the Update Tag Firmware button. The Tag Firmware update should only take
about ten seconds. The result (“Success” or “Failure”) will be displayed on the button. If
the result is “Success”, the Tag’s green LED will flash ever five seconds indicating that
the Tag is in Active state. If the result is “Failure”, move the Tag closer to the Access
Point and try again.