User's Manual

Page | 40 of 64 User Manual – PariRange – Revision 21019
© 2021 EmbedTek, LLC. All Rights Reserved.
Contact Recording
A Tag enters Alert status when another active Tag is detected within the alert range. Each Tag
in Alert status records other Tag ID(s) within the alert range and the cumulative time that they
were within alert range of each other. Tags will repeatedly search for signals from other Tags at
intervals that may vary based on the number of Tags present.
PariRange Access Point Operation
Downloading Tag Contact Tracing Data
The PariRange Contact Tracing Reader along with the PariRange Access Point application are
used together to download contact data from the PariRange Contact Tracing Tags.
Contact data remains on the Tag until the Access Point receives and confirms the integrity of
the contact data. The contact data is then deleted from the Tag.
WARNING: Contact data is retained on the Tag until it is downloaded. While there is enough
storage on the Tag to hold a minimum of 14 days of contact data, it is recommended that
contact data on the Tag be downloaded daily.
The following conditions must be true for the Access Point to download a Tag’s contact data:
• The Access Point is set up properly and running.
• The Tag is in Active, Alert, or Charging status.
o Note that contact data associated with an ongoing Alert will not be
available for download until the Alert ends. All other contact data on
the Tag is available for download.
• The Tag is within range of the Access Point.
Downloaded contact data that is stored on the Access Point computer is only imported into the
PariRange User Interface application when the PariRange User Interface application is open.
Backup files of the contact data remain on the Access Point computer after the contact data is
imported into the PariRange User Interface application.