User's Manual

Page | 11 of 64 User Manual – PariRange – Revision 21019
© 2021 EmbedTek, LLC. All Rights Reserved.
Hardware Specifications
Product Dimensions, Weight, and Operating/Storage Conditions
PariRange Contact Tracing Tag
Dimensions: 4.0in x 2.2in x 0.4in
Weight: 2 ounces
Operating Temperature and Humidity: -20 to 50
o
C, 5-95%
Storage Temperature and Humidity: -20 to 60
o
C, 5-95%
PariRange Contact Tracing Reader
Dimensions: 2.2in x 2.8in x 0.45in, Cable Length: 66in
Weight: 3.5 ounces
Product Attributes
The PariRange Contact Tracing Tag is made of hard sealed plastic and includes two LED
indicators (one green and one red), a vibration mechanism, a rechargeable lithium-ion polymer
battery, and an inductive charging coil.
The PariRange Contact Tracing Reader is made of hard sealed plastic and includes a USB
cable.
Charging and Battery Life
The PariRange Contact Tracing Tag is charged wirelessly via a Qi-certified charger. The Tag
indicates a successful connection to the charger by vibrating and then displaying a pulsing
green LED. The Tag indicates a full charge by displaying solid green LED. The Tag will operate
for 12 hours under typical use. The red LED will begin blinking when the battery is low. All
LEDs will stop blinking when the Tag battery is fully discharged. The Tag will take up to seven
hours to fully charge from a fully discharged state. Note that the Tag may take up to fifteen
minutes to indicate a successful connection to the charger if the battery is fully discharged. A
partial charge can be achieved in 1-3 hours, if necessary.