User`s manual

Getting Started With Linux on the LPC3250 OEM Board Page 9
Copyright 2009 © Embedded Artists AB Rev A
Figure 3 Send File via Tera Term
Figure 4 Transfer progress in Tera Term
2.5 Boot the u-boot
The u-boot has been loaded to the target and saved in the NAND flash. It is now time to boot and
setup the u-boot.
1. Issue the boot command to start u-boot.
EA3250> boot
2. The u-boot will now start and you will see something similar to the output below. Hit any key
to stop the u-boot from auto booting.
U-Boot 2009.03-rc1 (Sep 27 2009 - 14:27:25)
DRAM: 64 MB
NAND: 128 MiB