User`s guide

LPC3250 Developer’s Kit - User’s Guide
Page 27
Copyright 2011 © Embedded Artists AB
4.4 Connectors
The figure below illustrates the position of all external connectors on the QVGA Base Board.
Figure 4 – QVGA Base Board External Connectors
4.4.1 Mictor-38 ETM Connector
The ETM connector is not mounted on the board. It’s designated J6. The connector can be soldered to
the board if needed but it cannot be used with the LPC3250. It is only for the LPC24xx processor
family.
SD/MMC
J9
USB-to-serial
J15
Input power
J13
CAN
J17
NOT USED
Display Expansion
J36
RS232
J21
Expansion
connector
J1+J2
JTAG
J5
ETM
J8
not mounted
NOT USED
Ethernet
J4
USB OTG/Device
J26
NOT USED
USB Host, J28
Connects to the
USB interface of
the LPC3250
Expansion
connector
J3
SODIMM
connector
X1