Hardware manual

phyCORE-LPC3250 QuickStart Instructions

3 Getting Started

What you will learn with this Getting Started example:

 installing Rapid Development Kit software

 interfacing the phyCORE



-LPC3250, mounted on the Carrier Board, to a host-PC using the IAR

JLINK

 downloading example user code to the LPC3250 internal SRAM memory.

3.1 Installing Rapid Development Kit Software

3.1.1 Installing Documentation from the PHYTEC Kit CD

The PHYTEC Kit CD installs documentation, datasheets, and demo files for the phyCORE-LPC3250.

When you insert the PHYTEC Kit CD into the CD-ROM drive of your host-PC, the CD should

automatically launch a setup program. Otherwise the setup program (setup.exe) can be manually

executed from the root of the CD.

1. Insert the PHYTEC Kit CD.

2. On the Welcome to the phyCORE-LPC3250 Rapid Development Kit Setup Wizard window, select

Next to continue.

3. Keep C:\PHYTEC as the installation path and select Next to continue.

4. On the Ready to Install window, select Install.

5. After the installation process is complete, select Finish.

The PHYTEC Kit CD installation path is C:\PHYTEC\phyCORE-LPC3250 and the following five

subfolders are located within the phyCORE-LPC3250 directory:

Demos – This folder contains third party demos.

Documentation – This folder contains datasheets, hardware manual, QuickStarts, and other product