Hardware manual

Published by
 PHYTEC America LLC 2009 Document Number: L-718e_2
 Next, select the RS-232 item in the options tree, and choose the appropriate COM port and baud
rate.
1. Start Running. You should now be ready to run µC/Probe. Just press the run button ( ) to
see the variables in the open data screens update. Figure 7-3 displays the phyCORE-LPC3250
IAR Rapid Development Kit data screen where the pushbuttons state and the serial output are
being monitored. In addition to this data screen there are µC/OS-II data screens where detailed
information about each task is displayed.