User's Manual
Table Of Contents
- 1 Safety Directions
- 2 Description of the System
- 3 Accessories
- 4 Operation
- 5 Check & Adjust
- 6 Care and Transport
- 7 Technical Data
- 8 Software Licence Agreement/Warranty
- Appendix A Abbreviations
- Appendix B Regional Contact Addresses
Charging of one GEB364 battery
008895_002
a
b
008895 002
a
a AC power adapter
b GKL311 charger
4.4.1.2 Battery for the AT500 Instrument
24618_001
1
1
1
2
2
3
4
1. Push down the lock on the lid of the battery compartment to
open the battery housing.
2. Pull out the battery housing.
3. Pull the battery from the battery housing.
4. A pictogram of the battery is displayed inside the battery housing.
This pictogram is a visual aid to assist in placing the battery cor-
rectly.
5. Place the battery into the battery housing, ensuring that the con-
tacts are facing outward. Click the battery into position.
6. Place the battery housing into the battery compartment. Push the
battery housing in until it ts completely into the battery compart-
ment.
Change battery
step-by-step
52 Operation