Product data

98
M-Module Mezzanine I/O
MEN M-Module Mezzanine I/O
M63 – 32-/16-Bit Binary Data Acquisition/Generation
■ 32 inputs 0..32V
■ 16 output channels, 12..32V, 500mA each
■ 24V signals
■ Simultaneous sampling
■ 100kHz sampling rate per channel
■ 10µs acquisition/conversion time
■ 2 DSPs, 32 MIPS each
■ 160kB memory
■ Optical isolation
I/O
■ 16 outputs (high-side driver)
■■ Output voltage range: 12V..32V
■■ Output current log. 0: max. -200µA
■■ Output current log. 1: max. 500mA
■■ Switching time for output change: < 5µs
■■ Isolation voltage (optocoupler): 500V DC
■ 32 inputs
■■ Input voltage range: 0V..32V
■■ Switching threshold log. 1: 10V..32V
■■ Switching threshold log. 0: 0V..5V or open
■■ Input current log. 1: < 1mA
■■ Switching time for input change: < 50µs
■■ Excess voltage protection: ± 50V
■■ 16 inputs offer the possibility to be set to TTL
level (inputs at DSP-B)
■ Division into two groups, each group being
controlled by one DSP
Digital Signal Processing
■ 2 processors ADSP 2181 (Analog Devices)
■ 16k x 16 bits data memory
■ 16k x 24 bits program memory
■ Programming via host interface
■ External or internal trigger (programmable)
■ DMA host interface
Peripheral Connections
■ Via front panel on a shielded 44-pin HD-Sub
receptacle connector
■ Via carrier board (rear I/O)
■ Intermodule Port
M-Module Characteristics
■ A08, D16, INTA, IDENT, IMP, TRIGI
Electrical Specifications
■ Isolation voltage:
■■ 500V DC between isolated and digital side
■■ 180V DC between the channels
■■ Voltage between the connector shield and
isolated ground is limited to 180V using a
varistor; AC coupling between connector
shield and isolated ground through
47nF capacitor
■ Supply voltage/power consumption:
+5V (4.85V..5.25V), 570mA typ.
■ MTBF: 189,500h @ 50°C
Mechanical Specifications
■ Dimensions: conforming to
M-Module Standard
■ Weight: 96g
■ Temperature range (operation):
■■ 0..+60°C
■■ Industrial temperature range on request
■■ Airflow: min. 10m
3
/h
■ Temperature range (storage): -40..+85°C
■ Relative humidity range (operation):
max. 95% non-condensing
■ Relative humidity range (storage):
max. 95% non-condensing
■ Altitude: -300m to + 3,000m
■ Shock: 15g/0.33ms, 6g/6ms
■ Vibration: 1g/5..2,000Hz
Safety
■ PCB manufactured with a flammability rating
of 94V-0 by UL recognized manufacturers
EMC
■ Tested according to EN 55022 / 1999-05
(radio disturbance) and EN 55024 / 1999-05
(immunity) with regard to CE conformity
Software Support
■ MEN Driver Interface System
(MDIS for Windows, Linux, VxWorks, QNX,
RTX, OS-9)
■ Standard firmware
■ Host Toolbox (C library)