Product data

Analog Input
■ 4 analog input channels
■ Prepared for input conditioning adapter
■ ±1V max. input range
(without input conditioning adapter)
Analog Performance
■ High SNR: >60dB @ max. sampling
frequency (with external low jitter clock)
■ Analog input bandwidth: >200MHz
General Purpose Inputs
■ 2 digital GPIs per channel (GPI0..GPI7)
(TTL/LVTTL)
■ GPI0 is configurable as an external clock
source (LVTTL recommended)
■ GPI1 is configurable as an external trigger
source (TTL/LVTTL)
Binary Outputs
■ 4 outputs to control signal conditioning
adapter or external hardware
Trigger
■ Internal trigger, signal-sensitive with
adjustable hysteresis function
■ Free trigger positioning
■ Rising or falling edge
■ Programmable trigger delay
■ External trigger
■ Software trigger
Acquisition Clock
■ External 10kHz..50MHz
■ Internal low noise 48MHz
■ Internally divided by FPGA (base: 48MHz)
System Clock
■ FPGA Clock 100MHz
■ SDRAM Clock 100MHz
Buffer
■ 16MB memory
■ Organized as a ring FIFO
■ Width: 4 words
■ 2 MSamples with four active channels
■ 4 MSamples with two active channels
■ 8 MSamples with one active channel
■ Random access by the host
A/D Conversion
■ 12 bits resolution, max. 50MS/s
■ Track/hold
■ Oversampling technology
Recording
■ 12 ADC bits per channel
■ Up to 8 external binary inputs
Peripheral Connections
■ Via front panel on 4 shielded receptacle
connectors
■ Via carrier board (rear I/O)
M-Module Characteristics
■ A08, D16, D32, INTA, IDENT, TRIGI
Electrical Specifications
■ Supply voltage/power consumption:
■■ +5V (4.85V..5.25V), tbd.
■ MTBF: tbd. @ 50°C
Mechanical Specifications
■ Dimensions: conforming to
M-Module Standard
■ Weight: 100g (incl. input adapter)
Environmental Specifications
■ Temperature range (operation):
■■ 0..+60°C
■■ Industrial temperature range on request
■■ Airflow: min. 10m
3
/h
■ Temperature range (storage): -40..+85°C
■ Relative humidity (operation): max. 95% nc
■ Relative humidity (storage): max. 95% nc
■ Altitude: -300m to + 3,000m
■ Shock: 15g/11ms
■ Bump: 10g/16ms
■ Vibration (sinusoidal): 2g/10..150Hz
Safety
■ PCB manufactured with a flammability rating
of 94V-0 by UL recognized manufacturers
EMC
■ Tested according to IEC1000-4-2 (ESD) and
IEC1000-4-4 (burst) with regard to CE
conformity
Software Support
■ MEN Driver Interface System
(MDIS for Windows, Linux, VxWorks, QNX,
RTX, OS-9)
93
M-Module Mezzanine I/O
MEN M-Module Mezzanine I/O
M78 – 4-Channel Digital Oscilloscope
■ 4 analog input channels 50MS/s
for each channel simultaneously
■ Full oscilloscope functionality
■ 12 bits resolution
■ 16MB local memory
■ 64dB SNR at 3.58MHz
■ Comprehensive trigger possibilities
■ External trigger and clocking
■ Flexible onboard signal conditioning