Product data

CompactPCI Bus
3U CompactPCI CPU board PICMG
Spec. 2.0 R3.0 compliant
32-bit CompactPCI system slot functionality
with 7 possible external loads
PCI-to-PCI bridge
Double-slot solution (plus 1 mechanical slot
for hard disk)
V(I/O): +3.3V or +5V (Universal Board)
Also available as busless version (with ext. 5V)
CPU
Transmeta Crusoe TM5900 Microprocessor
with integrated Northbridge
800MHz
Graphics
SM731 controller
DVI and DVI-I connectors at front panel
235-MHz, 24-bit RAMDAC
Maximum resolution: 1600 x 1200 pixels
DualMon support
Memory
64KB L1 and 512KB L2 Cache integrated
in Crusoe CPU
Up to 1GB SO-DIMM DDR RAM
(512MB installed)
133MHz memory bus operation
64-bit data bus, 2.5V
Flash 4MB
8-bit data bus, 3.3V
Hardware data protection
Serial EEPROM 4kbit for factory settings
CompactFlash (TM) card interface for Flash
ATA (true IDE) via on-board IDE
Up to 8MB SDRAM, connected to FPGA,
e.g. for video data
16MB embedded SGRAM in SM731 graphics
controller
Interfaces
Two 10/100Mbits/s Ethernet channels
GD82551ER internal controllers
Two RJ45 connectors at front panel
UART RS232 serial interface COM1
One 9-pin D-Sub connector at front panel
Up to 230 kbaud
USB 1.1
Type A at front panel
Option: second interface via onboard
connector
Option: Up to 8 SA-Adapters
Mostly implemented in onboard FPGA
RS232, RS422/485, binary I/O,
keyboard/mouse, AC'97 audio, CAN...
Mass Storage
Fast IDE ports (UDMA5)
One IDE port for local CompactFlash
One IDE hard-disk/CD-ROM port via 44-pin
ribbon cable connector Ultra DMA100
PCI Interface
32-bit PCI interface at PCI-104 connector J1
Support of 2 external masters
Software Support
Award BIOS, Linux, Windows
CANopen support: MEN Driver Interface
System (MDIS for Windows, Linux, VxWorks,
QNX, RTX, OS-9)
MSCAN/Layer2 support:
MEN Driver Interface System (MDIS for
Windows, Linux, VxWorks, QNX, RTX, OS-9)
Product Options
SA-Adapters
Up to 8 SA-Adapters
Mostly implemented in onboard FPGA
RS232, RS422/485, binary I/O, AC'97, CAN...
Example config.: 2 CAN (SA08), 2 RS485
(SA02), 1 RS232 (SA03), 1 digital I/O (5 O, 5 I,
3 I/O –SA15),1AC'97 w. opt. isolation (SA12)
Front Connections
Ethernet with D-Sub instead of RJ45
COM1 with RJ45 instead of D-Sub
COM2 also available at front
USB 1.1
Second interface via onboard connector
Busless Also available with ext. 5V
9
CompactPCI
MEN CompactPCI
32-bit cPCI system slot or stand-alone, 12 HP
Transmeta TM5900 / 800 MHz
512 MB DDR RAM (SO-DIMM) installed
CompactFlash slot
2.5" hard disk slot
Dual Fast Ethernet, COM 1, USB1.1 (front)
DVI and DVI-I (front)
LCD (up to UXGA) and CRT
16 MB integrated graphics RAM
Up to 1600 x 1200 pixels
AC'97 (opt. isolation), keyboard/mouse, CAN,
COMs... optional via FPGA with SA-Adapters
Option: up to 8 SA-Adapters
F8 – 3U CompactPCI Infotainment SBC