Product data

85
M-Module Mezzanine I/O
MEN M-Module Mezzanine I/O
■ 32 TTL inputs/outputs
■ 48mA drivers
■ Active terminators
■ Same line interface as SCSI
■ Fast 16-bit host access
Input/Output
■ 32-bit TTL I/O
■ 48mA driver performance per I/O bit
■ 4 groups, alternatively input or output
■ Active terminators can be activated
for each group
■ Output low current (VOL max. 0.55V):
min. 64mA
■ Output high current (VOH min. 2.0V):
min. -15mA
■ Input high current: max. 100µA
■ Input low current: max. -100µA
■ Input voltage: min. -0.5V, max. 6V
Miscellaneous
■ Trigger line with interrupt capabilities
Peripheral Connections
■ Via front panel on a shielded 44-pin HD-Sub
receptacle connector
■ Via carrier board (rear I/O)
M-Module Characteristics
■ A08, D16, INTA, IDENT
Software Support
■ MEN Driver Interface System
(MDIS for Windows, Linux, VxWorks, QNX,
RTX, OS-9)
M43 – 8 Relay Outputs
■ 8 relay outputs
■ 1A switching power per relay
■ One throw-over contact per relay
■ Output voltage range max. 100V
■ No separate supply voltage
Relay Outputs
■ 8 outputs as throw-over contacts
■ NO (normally open), NC (normally closed)
and common contacts
Ratings
■ Maximum switching voltage: 48V
■ Maximum switching current: 3A
■ Maximum operation current: 1A
■ Maximum switching power: 60W
Switching Time
■ 2ms typ. for NO and NC
Miscellaneous
■ Relay status can be read out – "read-modify-
write" accesses possible
■ Low heat development by use of CMOS
components
Peripheral Connections
■ Via front panel on a shielded 25-pin D-Sub
receptacle connector
■ Via carrier board (rear I/O)
M-Module Characteristics
■ A08, D08, IDENT
Electrical Specifications
■ Supply voltage/power consumption: +5V
(+10%/-0%), 700mA typ. (all relays active)
■ MTBF: 1,000,000h @ 50°C
Mechanical Specifications
■ Dimensions: conforming to
M-Module Standard
■ Weight: 98g
Environmental Specifications
■ Temperature range (operation):
■■ 0..+60°C
■■ Industrial temperature range on request
■■ Airflow: min. 10m
3
/h
■ Temperature range (storage): -40..+85°C
■ Relative humidity range (oper.): max. 95% nc
■ Relative humidity range (storage):
max. 95% non-condensing
■ Altitude: -300m to + 3,000m
■ Shock: 15g/0.33ms, 6g/6ms
■ Vibration: 1g/5..2,000Hz
(immunity) with regard to CE conformity
Software Support
■ MEN Driver Interface System (MDIS for
Windows, Linux, VxWorks, QNX, RTX, OS-9)
M58 – 32-bit TTL I/O Interface