Product data

74
PCI Mezzanines – PMC & PC-MIP
MEN PCI Mezzanines – PMC & PC-MIP
■ Class 1/2 Profibus DP master (DIN19245)
■ Isolated RS485, RS232 (debug) interface
■ Local 32-bit CPU
■ Up to 127 active or passive stations
■ 12Mbits/s data transfer rate
■ 1MB DRAM
■ Complete Softing Profibus software on-board
■ Compatible with PROFIBUS DP Configurator (Softing)
P6 – PC-MIP Profibus DP Master
■ Full CAN/Extended CAN
■ Local 32-bit CPU
■ ISO high-speed coupling
■ 1Mbit/s data transfer rate
■ Optical isolation
■ CANopen master and slave software support (Vector Informatik)
■ Intelligent CAN Layer 2 support
MC68331/16MHz CPU
■ CPU32 performance
■ Complete Profibus DP software on one
PC-MIP
■ Local interrupt controller
■ Hardware watchdog
ASPC 2 Profibus Controller
■ Up to 12Mbaud data rate
■ 16-bit DMA interface (local)
■ Complete bus access protocol
■ Up to 127 active or passive stations
Miscellaneous
■ 1MB shared memory for communication
and program
■ PCI interface with autoincrement
address mode
■ Status LEDs
■ Isolated Profibus interface
Peripheral Connections
■ Via front panel on a shielded 9-pin D-Sub
receptacle connector
PCI Characteristics
■ 32-bit PCI, complying with PCI Local Bus
Specification, Rev. 2.2
■ Target and initiator
■ I2O Ready Messaging Unit
Software Support
■ Softing protocol portation (ISO/OSI protocol
layer 2/DP)
■ MEN Driver Interface System (MDIS for
Windows, Linux, VxWorks, QNX, RTX, OS-9)
CAN Controller
■ I82527
■ Standard and extended frames
■ Up to 15 message objects
■ Up to 1Mbit/s
I/O Processor
■ MC68331
■ 32-bit CPU32
■ 24MHz
Physical Interface
■ ISO high speed transceiver 82C251
■■ Optically isolated
■■ Automotive 24V compliant
Memory
■ 1MB shared SRAM for communication and
program
Peripheral Connections
■ Via front panel 9-pin D-Sub plug connector
PCI Characteristics
■ 32-bit PCI, complying with PCI Local Bus
Specification, Rev. 2.2
■ Target and initiator
■ I2O Ready Messaging Unit
Electrical Specifications
■ Optical isolation: 180V DC GND-to-Shield
■ Supply voltage/power consumption:
■■ +5V (4.85V..5.25V), tbd.
■■ +3.3V (3.14V..3.47V), tbd.
■ MTBF: 310,000h @ 50°C
Mechanical Specifications
■ Dimensions: PC-MIP Type II conforming
to PC-MIP specification, 10H module
■ Weight: 32g
Software Support
■ CANopen firmware (Vector Informatik)
■ ICANL2 firmware and toolbox (MEN)
■ MEN Driver Interface System (MDIS for
Windows, Linux, VxWorks, QNX, RTX, OS-9)
P5 – PC-MIP Intelligent CAN Interface