Product data

72
PCI Mezzanines – PMC & PC-MIP
MEN PCI Mezzanines – PMC & PC-MIP
10/100Base-T Fast Ethernet
Intel
®
21143 Ethernet controller
RJ45 connector
Full duplex
Electrical isolation
Four asynchronous channels
Full-duplex
128 bytes FIFO per transmitter/receiver
per channel
Ethernet Interface
10/100Base-T with three status LEDs at front
Full duplex support
Media Access Control (MAC) address stored
in onboard serial EEPROM
PCI Characteristics
32-bit PCI, complying with PCI Local Bus
Specification, Rev. 2.1
Target and initiator
Peripheral Connections
Via front panel on a standard 8-pin RJ45
receptacle connector
Electrical Specifications
Isolation voltage: 1.5kV RMS
(0..1000m above sea level)
Supply voltage/power consumption:
+5V (4.85V..5.25V), 120mA typ. (operation),
80mA typ. (stand-by)
+3.3V (3.15V..3.6V), 150mA typ. (operation),
30mA typ. (stand-by)
MTBF: 316,000h @ 50°C
Mechanical Specifications
Dimensions: PC-MIP Type II conforming to
PC-MIP specification
Weight: 30g
Environmental Specifications
Temperature range (operation):
0..+60°C
Industrial temperature range on request
Airflow: min. 10m
3
/h
Temperature range (storage): -40..+85°C
Relative humidity (operation): max. 95% nc
Relative humidity (storage): max. 95% nc
Altitude: -300m to + 3,000m
Shock: 15g/0.33ms, 6g/6ms
Vibration: 1g/5..2,000Hz
Safety
PCB manufactured with a flammability rating
of 94V-0 by UL recognized manufacturers
EMC
Tested according to EN 55022 / 1999-05
(radio disturbance) and EN 55024 / 1999-05
(immunity) with regard to CE conformity
Software Support
WindowsNT
VxWorks
Linux
UART
4 16C950 high-performance UARTs
Full software compatibility with 16C550
UARTs
Configured with I/O or memory base address
8 128-byte FIFOs
Data rates
UART controller supports up to 15Mbps
Physical interface supports up to 10Mbps
Full duplex/half duplex interface
PCI Characteristics
32-bit PCI, complying with PCI Local Bus
Specification, Rev. 2.2
Target
Peripheral Connections
Via front panel on a shielded 26-pin half-
pitch D-Sub receptacle connector
Via J3/carrier board
Electrical Specifications
Supply voltages/power consumption:
+5V (4.85V..5.25V), 130mA
+3.3V (3.15V..3.6V), 40mA
MTBF: 190,000h @ 50°C
Mechanical Specifications
Dimensions: PC-MIP Type II conforming to
PC-MIP specification
Weight: 28g
Environmental Specifications
Temperature range (operation):
0..+60°C
Industrial temperature range on request
Airflow: min. 10m
3
/h
Temperature range (storage): -40..+85°C
Relative humidity (operation): max. 95% nc
Relative humidity (storage): max. 95% nc
Altitude: -300m to + 3,000m
Shock: 15g/0.33ms, 6g/6ms
Vibration: 1g/5..2,000Hz
Safety
PCB manufactured with a flammability rating
of 94V-0 by UL recognized manufacturers
Software Support
WindowsNT
VxWorks
OS-9
Linux (on request)
P12 – PC-MIP 10/100Base-T Ethernet
P11 – PC-MIP Quad RS422/485 UART